The QR code of the bracelet/watch is in the watch settings-connect to the App.

The bracelet measures the heart rate, which will fluctuate due to external interference, and the human heart rate is also a fluctuating dynamic value. After the bracelet displays the heart rate value, the heart rate value will gradually stabilize and fluctuate in a small range.

The mobile phone traffic only needs to be turned on in advance when binding the bracelet and uploading the synchronized data. It does not need to be turned on all the time.

1. When wearing the bracelet, adjust the position of the metal buckle of the wristband, and the sensor of the bottom shell of the bracelet fits the skin;
2. Light up the bracelet, keep the bracelet relatively still while measuring the heart rate, and don't shake it greatly;
3. The bottom shell sensor of the bracelet should be smooth, clean, free from excessive hair, foreign matter, tattoos, and wounds.

There is a heart rate monitoring function setting in the App setting interface. Some devices do not support this function.

The watch can answer and hang up calls, and the user needs to connect to the watch’s Bluetooth 3.0.

In the watch, you need to turn on the camera switch in the settings interface. Both the bracelet/watch can be operated on the device side to take pictures when connected to the App, and the bracelet can also be operated on the App side to take pictures.

The watch can control music, the user needs to connect the watch Bluetooth 3.0.

On the device interface, click the unbind button under the device. Apple users need to find the device in the settings interface, click the exclamation mark at the back, and click to ignore this device.

Check whether the weather switch is turned on in the settings interface. When you need to check the weather, you need to connect your bracelet/watch to the App to synchronize weather data.

The phone needs to run ios9.0 and above or Android 4.4 and above.

Automatically synchronize time when the watch is connected to the app.

1）principle
When the wristband/watch is worn on the wrist, it will track the displacement and gravity changes caused by changes in body movements to determine whether the person is in a sleep state. When the person sleeps, the sensor will record still, turn over, move the arm, etc. Changes in activity, in order to determine sleep status and quality.
2) Why there is no sleep data
a. Please make sure you wear a bracelet/watch when you sleep
b. Physical activity is too frequent during sleep, poor sleep quality, and bracelet recognition is not a sleep state
c. The bracelet/watch is too loose to recognize the sleep state.

1)principle
The sensor/bangle sensor in contact with the skin emits a beam of light that illuminates the skin and measures the reflected/transmitted light. Because blood absorbs light of a specific wavelength, each time the heart pumps blood, the wavelength is absorbed a lot to determine the heartbeat.
2) Why is there no heart rate data when the watch/brace is running?
a. Please check if the bracelet/watch is fully charged, and the heart rate cannot be measured when the battery is low.
b. When the watch/wristlet is worn loose during running, it may not monitor the heart rate

1)The Android side needs to add the APP to the whitelist and authorize it in the notification module of the mobile phone system.
2)ios requires Bluetooth binding device and authorization in the notification module of the mobile phone system
3)QQ, WeChat When logging in on the PC, QQ does not support the bracelet reminder function. WeChat needs to click "Windows WeChat has been logged in" on the mobile phone main interface. Then click "Mute Phone" to resume the mobile phone notification.

1)Power on: When the bracelet is out of power, charge it for about 1 minute to boot into the main page. When the bracelet has power, press and hold the touch button 3-5S, and the bracelet will vibrate to boot into the main page.
2)Shutdown: Switch to the shutdown page of the bracelet, long press the touch button 3-5S, the watch will appear the shutdown screen, and the shutdown will be successful after the screen is off.

1.Please make sure that the phone’s Bluetooth is turned on, and that the phone’s OS version is the same or higher than the required version;
2.Please make sure that the distance between the wristband and the phone does not exceed 0.5 meters, and the Bluetooth communication distance after pairing does not exceed 10 meters;
3.If an iPhone is used, please make sure that all Bluetooth devices are disconnected, please go to Settings-Bluetooth to check My Devices and see if the wristband is connected or not. If connected, then click Forget this Device by clicking the icon next to it. Run the App again to search for the device and pair the wristband;
4.Please check whether the wristband is low on batter level.

1.or models above Android 6.0,lease check whether the location service and location permissions are enabled.
2.Turn off your Bluetooth,wait about 10 seconds and then turn on Bluetooth to connect.
3.Restart the APP to connect.
4.If it is an iPhone, you need to click the exclamation mark behind the device name in the system Bluetooth settings, enter and click Ignore this device and reconnect again.

The data of sports and sleep will be saved on the wristband before data synchronization. When the wristband is connected with the App on mobile phone, the data on the wristband will be uploaded to the App automatically. About 7 days of data can be stored on the wristband. When the memory is full, the system will overwrite the earliest data automatically. Please remember to synchronize the data to the App in a timely manner. Note: If you need call and message notification, make sure that the wristband’s Bluetooth is connected with the App. After setting alarm prompt and other functions, they can be used without Bluetooth connection.

Because Android 6.0 has updated the power management method, when the APP is in the background, the system will periodically clean up the background APP, and the connection will be easily disconnected. If you want to not be cleaned up, you need to actively set the power consumption protection.

1.Check whether the permission of the APP message notification bar is enabled.
2. Please confirm that the apps that push messages (such as Facebook, WeChat) and other apps allow messages to be displayed on the notification bar.
3. Check whether the SMS and call permissions of some mobile phones in the APP (such as Xiaomi) are blank permissions, if so, please modify them to allow permissions.
4.Please check that the APP is running and connected to the device. If you need to receive messages in the background for a long time, please add the APP to the whitelist and ignore the battery optimization

1.Please make sure that the App is added to the Autorun list and notification permission for the Blulory FUN App in system settings is turned on;
2.Please add the Blulory FUN App to the white list to run in the background on the Android system;
3. Please make sure that “call and message” in the Settings->Notification in the Android system is turned on;
4.When there is no notification prompt on the App, please reset the wristband and connect again, and add the App to the Autorun list and allow notification permission to the Blulory FUN App.

1.Please make sure that the phone’s Bluetooth is turned on for normal communication between the wristband and the phone;
2. After the wristband is connected to the App for the first time, there will be a prompt for pairing, click OK, or notifications cannot be received. The connected devices will be shown in the phone’s Settings- Bluetooth. If it shows “Connected” and an exclamation mark on the Bluetooth page, it means the Bluetooth connection between the device and the phone is normal. The phone is not connected with the wristband if there is no exclamation mark.Click the exclamation mark, click Forget this Device, this will cut off the connection between the wristband and the phone completely, and the wristband will no longer receive messages sent by the phone;
3.Some Apps may require additional settings, take the WeChat message notification for example: go to the WeChat settings--new message notification—turn on Receive New Message Notification”. If it is off, then go to “Settings” to turn on by following the steps above, and turn on Display Details of Message. Only in this way can the wristband capable of displaying characters have access to notifications;

1.After the App is connected to the Android phone for the first time, there will be a prompt to turn on the notification permission, follow the prompt and go to “Apps & notifications”, tick the Blulory FUN, otherwise system notifications may not be sent to the wristband;
2.Notifications that the wristband receives come from the phone’s notification bar. If the phone’s notification bar does not receive notifications, the wristband will be unable to receive notifications;
3.If QQ, WeChat and other Apps are logged in on the computer and mobile phone simultaneously, the phone will not receive the notification, the account on computer has to be logged out;
4.Run the App--click other settings--click accessibility function (Accessibility on some mobile phones)--toggle Blulory FUN’s switch.

For mobile phones with MIUI 12 and above, the blank pass permission has been added. You need to manually go to the system permission and set the permission to obtain mobile phone information and contacts to always allow.

1.Please set the APP location information permission to "Always Allow".
2. Add APP to whitelist and ignore battery optimization

1.Please check whether the automatic heart rate measurement is turned on on the APP device page.
2.Whether the back light flashes during heart rate measurement.

After the bracelet is connected with the [Blulory FUN] APP, enter the [Device] page in the APP -> click [Firmware Upgrade]

The APP language is automatically converted following the system language, and currently supports Simplified Chinese, Traditional Chinese, English, Russian, Spanish, German, Italian, French, Portuguese, Polish, Dutch, Greek, Turkish, Romanian, Japanese, Hebrew, Arabic, Thai, Malaysian, Indonesian, Vietnamese, Hindi, Burmese, Korean, Persian, Czech, Slovak, Ukrainian,etc.

1.When the watch starts to exercise, please keep connected to the APP throughout the whole process. The APP will help you record your exercise track in the background. It is recommended that you turn on the GPS of your mobile phone to reduce the deviation of the track record. After the exercise, the APP will automatically stop recording the track.
2.To ensure the accuracy of the map track record, it is recommended to add the APP to the battery-free optimization or allow the APP to run in the background to prevent the APP from being killed by the system in the background and the watch is disconnected.

Reconnect after unbundling. If the synchronization timeout is all the time, Restart the watch and synchronize with the APP.

Search for "Blulory FUN" updates on Google Play and various mobile application stores on Android phones, and search for "Blulory FUN" updates on the App Store on Apple phones.

Auto start
Power consumption protection
Device permissions
Application lock
Location
Camera
Bluetooth
Gyro
Right to use notice

Auto-start-in order to restart the phone, the watch can automatically connect with the App.
Take power consumption protection-in order to prevent accidental killing by the system when the App is running.
Device permissions-in order to be able to use all the functions of the App normally, it is recommended to open them all. For example, the permission to open the phone class is to be able to see the caller ID. The camera permission is enabled to be able to take pictures remotely.
App lock-prevent App from being killed by the system when it is running
Location-Needs location permission to record movement track.
Camera-The device needs to start the camera to take pictures through Bluetooth, and get the picture through the camera to set the avatar
Bluetooth- Bluetooth function is required to connect to your watch
Gyro will be used for sports functions when needed.
Notification usage rights-in order to synchronize the notifications of incoming calls, text messages and other social apps.

1.Open the App-for each item, select allow or uninstall and reinstall, allowing every authorization inquiry of the system.
2.Android phone-enter settings-applications and permissions-permissions management-find Blulory FUNAPP, turn on all the option switches.
3.iOS phone-enter the settings-pull down the phone to the bottom-open Blulory FUN, and turn on all the options.

Yes, our App has passed the Google Play Store and Apple App Store certification. So, for the required permissions, please rest assured that all are allowed.

This is determined by the development standards of Google Android: Android 6.0 and above models need to enable GPS location service to search for Bluetooth.

Some functions will not work normally, it is recommended to enable them all. For example, if you turn off "notification access", the watch will not be able to receive notifications from incoming calls, text messages and social apps.

Please contact email:Info@unixindia.in; For more details, you can also refer to our "Privacy Policy": Open the App—My—Privacy Policy

(1) Go to Settings-- Protected Background Apps--select Blulory FUN, or click Phone Manager-- click Speed up”--click Protected App--select Blulory FUN ;
(2) Go to Settings--click Autorun List-- select Blulory FUN.

(1) Run OPPO Phone Manager-- click Permission & Privacy--click Manage App Permission-- click App-- “I trust this App”;
(2) Start the App--click the touch button at lower left of the mobile phone--click the lock at upper left of the App;
(3)Start Autorun Manager--click Phone Manager-- click Autorun Manager--select Blulory FUN.

(1) Start i Manager-- click Settings at the upper right corner--click WhiteList”--select Blulory FUN;
(2) Start i Manager-- click App Manager--click Autorun Manager--select Blulory FUN;
(3) Configure background Apps for power saving -- run i Manager->Battery->high power consumption Apps in background->select Blulory FUN.

(1)Start the App –long press the Home button on the phone--swipe down the App--click “lock the App”;
(2)Go to Settings--click Permission Manager-click Autorun Manager --select Blulory FUN;
(3)Protect the App to run in background --go to Security Settings--select Battery--Apply Smart Power Saving, select Blulory FUN in the installed Apps--enter Blulory FUN, tick the unrestricted option.

(1)Run the App-- press the lower left part of the touch screen--click Lock App;
(2)Turn on the Autorun switch.

(1) Go to Security Settings--click Advanced --click Permission Manager-- click All Apps--click Blulory FUN--select Trust this App--turn on Autorun Permission--select Display Notifications;
(2) Run Phone Manager--click Permission Manager--click Autorun Manager--select Blulory FUN;
(3) Run Phone Manager-- click Speed up-- click Settings at the upper right of the screen-- click White List-- click Add to the Whitelist.

(1)Go to Settings--click Apps and Permission--click Autorun--select Blulory FUN;
(2) Go to Settings --click Apps and Permission--click Sleep Mode of Apps (if the Sleep Mode of Apps is switched on, click Sleep Mode Manager)-- select Blulory FUN.

(1)Find the Autorun option in Settings or Phone Manager or Security Settings, add Blulory FUN to Autorun list;
(2) Find Power Saving Manager in Settings or Phone Manager, add Blulory FUN to the protected app list;
(3) Swipe down or long press Blulory FUN in the recent Apps list, add to the whitelist or lock it.